Loading... Please wait...

Dataloggers

Model 8020-54 Vibrating Wire to Analog Converter | Discontinued

Model 8020-54 Vibrating Wire (VW) to Analog Converter (this product has been discontinued).
  • Model 8020-54 Vibrating Wire (VW) to Analog Converter (this product has been discontinued).

The Model 8020-54 Vibrating Wire (VW) Frequency to Analog Converter provides a simple way to connect GEOKON vibrating wire transducers to data acquisition systems, which are not capable of reading frequency signals nor able to generate the proper signals required to excite VW transducers. It can operate with single transducers, as a stand-alone device, or with multiple transducers in conjunction with the Model 8032 Multiplexer. The converter is powered using either a 12 V supply (Model 8020-54) or a 24 V supply (Model 8020-54A).

The Model 8020-54 has been replaced by the Model 8020-59 Vibrating Wire to Analog Converter.

Specifications

Power Requirements
12 V or 24 V; 40 mA @ 12 V (operation), 50 µA (standby); 60 mA @ 24 V
Operation Modes
Single Channel, 16 VW sensors with thermistors, or 32 VW sensors
Output (Analog)
0-5 V, 4-20 mA (isolated loop controller)
Accuracy
0.1% F.S.
Resolution
16 bit
Temperature Range
−20°C to +80°C
L × W × H
111 × 108 × 36 mm (with cover)

Please Note: GEOKON maintains an ongoing policy of design review and reserves the right to amend products and specifications without notice. Various instruments are discontinued over time and replaced with new, updated models.

top