4100 Part Numbers

Description

4100                    

Strain gauge only

4100A-1

Vibrating Wire Strain gauge, spot weldable type, 2" gauge length, spot weldable shims. Complete with 10'/3 m cable and thermistor.

4100A-2

Vibrating Wire Strain gauge, spot weldable type, 2" gauge length, spot weldable shims. Cable sold as separate line item.

4100-1

Plucking coil, with thermistor and mounting straps, varied cable. Cable sold as separate line item.

4100-2

Plucking coil, with thermistor and mounting straps, 10' cable length

02-187V3-E

Red PVC Cable, 0.187" θ, 2 twisted pairs, for the above

02-187V3-M

Red PVC Cable, 0.187" θ, 2 twisted pairs, for the above

4150-3

Positioning tool

4100-4

Tension wrenches

4100-5

Weldable cover plate, 2" channel × 12" long, with mounting bolts

4100-6

Micro-Measurements Model 700 spot welder for 4100/4150 spot weldable shims. Includes one angled and one straight tip.

4100-7-A

Micro-Measurements Model 700 spot welder electrodes (angled)

4100-7-S

Micro-Measurements Model 700 spot welder electrodes (straight)

4100-8

VW Strain Gauge, 5,000 microstrain, calibrated, spot weldable type

4100-9

VW Strain Gauge, 10,000 microstrain, calibrated, spot weldable type

4100-10

Gauge Protection Kit, comprising of 128 RTV (ADH-124B), Permabond 910 SuperGlue (ADH-104) and Mastic Tape (enough for approximately 25 gauges). MSDS sheets required for all shipments.

4100-10A

Gauge Protection Kit, comprising of 128 RTV (ADH-124B) and Permabond 910 SuperGlue (ADH-104) (enough for approximately 25 gauges). MSDS sheets required for all shipments.

4100-15

Adhesive Kit. Loctite 410 adhesive (0.70 oz.) and Loctite 712 accelerator (0.70 oz.), sufficient for up to 50 gauges. MSDS Sheet Required.

4150 Part Numbers

Description

4150

Vibrating Wire Strain gauge, 3,000 microstrain range, with spot weldable shims, integral plucking coil, cover plate and thermistor. Cable sold as separate line item.

4150-4

Vibrating Wire Strain gauge, 5,000 microstrain range, with spot weldable shims, integral plucking coil and cover plate. Includes thermistor and individual calibration. Cable sold as separate line item.

4150-5

Vibrating Wire Strain gauge, 10,000 microstrain range, with spot weldable shims, integral plucking coil and cover plate. Includes thermistor and individual calibration. Cable sold as separate line item.

4150-1

Extra cover plate with welding straps

02-187V3-E

Red PVC Cable, 0.187" θ, 2 twisted pairs, for the above

02-187V3-M

Red PVC Cable, 0.187" θ, 2 twisted pairs, for the above

4150-3

Positioning tool

4150A

Vibrating Wire Strain gauge, 3,000 microstrain range without spot weldable shims, with integral plucking coil, and thermistor. Cable sold as separate line item.

4150A-4

Vibrating Wire Strain gauge, 5,000 microstrain range, without spot weldable shims, with integral plucking coil. Includes thermistor and individual calibration. Cable sold as separate line item.

4150A-5

Vibrating Wire Strain gauge, 10,000 microstrain range, without spot weldable shims, with integral plucking coil. Includes thermistor and individual calibration. Cable sold as separate line item.

4150A-1

End blocks for 4150A series gauges. (add 4150A-2 Cover Plate and 4150A-3 Spacer Bar if required).

4150A-2

Protective Cover Plate with welding straps, for use over 4150A-1 End Blocks

4150A-3

Spacer Bar, for use with 4150A-1 End Blocks

4151 Part Numbers

Description

4151

Vibrating Wire Surface Mount Strain gauge, 3,000 microstrain range, with integral plucking coil, end blocks with pins for grouting, cover plate and thermistor. Cable sold as separate line item.

4151-1

As above, but with 5,000 microstrain range. Includes individual calibration.

4151-2

As above, but with 10,000 microstrain range. Includes individual calibration.

02-187V3-E

Red PVC Cable, 0.187" θ, 2 twisted pairs, for the above

02-187V3-M

Red PVC Cable, 0.187" θ, 2 twisted pairs, for the above

4151-3

Drilling Template for 4151